Skip to content

Components for EIFS contractors

EIFS System Components

Shop ticket for a J&J Power Station window header: an EPS shape with base coat, mesh and a 3-inch back-wrap, with exposed mesh left to lap into the field EIFSView project →

Pre-coated EIFS shapes, window packs, starters, flats and EPS foam from our shop in Reno, for EIFS and plaster contractors in Nevada, California and Montana.

What we do

Pre-coated EIFS shapes

EPS foam shapes, stock or custom, hot-wire cut to your drawings and supplied foam only, meshed and base-coated, or fully finished, with edges back-wrapped where the detail calls for it.

  • Window surrounds, sills, belly bands, cornices and columns
  • Cut from a dimensioned drawing or a profile sample
  • Detailed to your field system and WRB
  • Labeled by location so pieces go up in order

Window surrounds and window packs

Every piece for an opening, cut, meshed, base-coated and back-wrapped in the shop, so the crew sets the complicated parts and builds around them with flats instead of back-wrapping and shaping in the field.

  • Pre-back-wrapped headers, jambs, surrounds and sills
  • Exposed mesh and EPS left at the edges to lap into the field system
  • One labeled pack per opening, ticketed from the drawings

Starter boards

EPS starter boards with mesh and base coat applied in the shop, ready to set at the base of the wall and at floor lines.

  • Cut to your thickness and profile
  • Mesh returned for lapping into the field system

Flats and trim bands

Flat foam stock and bands cut to width and length for EIFS and stucco trim.

  • Bands, flats and returns
  • Cut to the run list

EPS billets and blocks

EPS foam in full billets or cut blocks for fabricators, formwork, carving and mass fill.

  • Full billets or cut to size
  • Densities to the application

Geofoam

We source geofoam blocks directly and have supplied lightweight fill for Caltrans off-ramps. Foam is lighter and cheaper than soil or concrete fill, and it helps isolate a structure from ground movement.

  • EPS geofoam for lightweight fill and void fill
  • Supplied to the job's specification

Start a conversation

Tell us what you’re building

Every project starts with a conversation. Bring a drawing, a model or an early question, and we will tell you how we would approach it. Contact BayStone →