Front facade of the Sonoma County residence, with the entry arcade and a tiered fountain in the forecourt

The project

A private residence, inside and out

On this private residence in Sonoma County, California, designed by Harris & Kasten, BayStone did nearly the whole exterior, from the eaves down, and much of the interior. The house draws on the Moorish architecture of the Alhambra, and its arches, columns, capitals and medallions were all detailed from it. We drew the shop drawings, made the molds, cast the architectural elements and supplied them, ran the exterior cement plaster beneath them, and applied plaster inside the house in the field.

The work carried on into the courtyard and the pool area. We cast two fountains, one of them a recreation of the Court of the Lions fountain from the Alhambra. The job ran from the first mockups in 2018 to the last pieces in 2024.

BayStone's work
Architectural elements, plaster, fountains and the pool area, inside and out
Products
Cast arches with carved spandrel panels, column capitals, columns and half columns, window surrounds, acanthus medallions, corbels, pier caps, two cast fountains, a pool pavilion, pool coping and wall caps, pool tile, pool and pergola pavers, exterior cement plaster, interior plaster
Materials
Cast architectural elements, and Baystone over an EPS core for the pool caps
Shop drawings
More than 200 pages, in eight packages
Largest piece
A fountain element just over 2,400 pounds
Years
2018 to 2024
Location
Private residence, Sonoma County, CA

The work

The house

The architects' detailing for the house came straight from the Alhambra, and our team still calls it the truest BayStone house we have worked on.

Outside, we covered the walls from the eaves down. The cement plaster went on first, then the cast elements and trim over it. That included the main entrance arcade with its carved arches and spandrel panels, the half columns and capitals at the entry and the arched windows, the window surrounds and a chimney panel with three blind arches. Inside, we made the gallery arches and columns, carved spandrels and sconces for the rooms, and applied plaster by hand in the field.

Pre-construction

Drawings and mockups

Carved capital with the valley beyond

Every piece was drawn before it was made. Across the job we produced more than 200 pages of shop drawings in eight packages, showing each element in plan, elevation, section and isometric view, from the exterior and interior in 2019 to the fountain, the pier caps and the pool.

The acanthus medallions and partial columns were drawn in 2018 and redrawn before production. A full foam mockup of the Alhambra elements went through the shop before anything was cast.

Production

Molds and casting

Lion fountain against the garden wall

The carved capitals, spandrel panels and medallions were made in our shop from our own molds, then cast and finished. The arch bands and carved spandrels for the arcade were laid out on the shop tables before they shipped, and the capitals went out on pallets ready to set.

On site, the arcade went up from scaffolding, with each carved panel set above its arch.

Fountains

Lions court

Pool gate with fruit urns on the piers

The main fountain recreates the Court of the Lions at the Alhambra in Granada, a fountain we photographed and studied in Spain.

The large fountain pieces were cast upside down, then flipped out of the form, pointed up and etched. The center channel piece weighs just over 2,400 pounds. Before it left the shop, we set the fountain bowl on its ring of cast lions to check the fit, and drew the install sequence piece by piece, including the plumbing through the lions.

A second cast fountain, for the west garden, was assembled in our shop in the fall of 2019, and the architects came to see it there before it went to the site.

Pool

Pavilion and pavers

Entry loggia with carved arches and lanterns

The pool area came last. We made the pavilion, the coping, the wall caps, pier caps and corbels, and the tile. The caps are Baystone over an EPS core, wrapped in mesh and base.

The pool and pergola pavers, including a round radial pattern under the pergola, went through several rounds of shop drawings with the architect's redlines before production.

Products

What we made

Cast pieces on pallets in the yard, ready to ship

Architectural elements, fountains and plaster for a private residence, cast in our shop:

  • Cast recreation of the Alhambra's Court of the Lions fountain, with lions, channels and bubblers
  • A second cast fountain for the west garden
  • Main entrance arcade with carved arches and spandrel panels
  • Column capitals with carved shell and acanthus detail
  • Columns, half columns and column shafts
  • Entry columns
  • Window surrounds, including a three-arch window surround with half columns
  • Interior gallery arches with carved spandrels
  • Acanthus medallions
  • Sconces
  • Chimney panel with blind arches
  • Corbels
  • Pier caps
  • Pool-surround walls and wall caps
  • Pool coping
  • Pool pavilion
  • Pool tile
  • Pool pavers and pergola pavers
  • Exterior cement plaster
  • Interior plaster, applied in the field

On the job

2018 to 2024

Carved capital seen from below

Mockups, summer 2018. The medallion and partial column designs were redrawn, and a foam mockup of the Alhambra elements went into production in August 2018.

  1. 2019

    House drawings and production

    The exterior and interior shop drawing packages went out in the summer of 2019, followed by the chimney. Capitals, column shafts and arcade pieces went through the shop, and the second fountain was assembled in the fall.

  2. early 2021

    Court of the Lions

    The fountain was cast in January 2021 and set in place that winter, with a crane lifting the large pieces.

  3. 2022

    House

    By April 2022 the interior and exterior work was finished, and we filmed the completed house.

  4. 2023 to 2024

    Pool area

    The coping, wall caps and pier caps were drawn and made in 2023. The pavers were drawn, made and delivered in early 2024. BayStone's work at the residence was complete in September 2024.