
Explore the work
Photographs
Photographs
Curved entrance colonnade
About this image
EIFS columns, capitals and cornice on the curved entrance colonnade of the San Francisco East Bay Museum in Concord, CA
Prefabricated EIFS panels · Museum exterior · Concord, CA
The project
A museum of the world's wildlife, built from the outside in.
The San Francisco East Bay Museum in Concord, California, shows animals from all seven continents in their landscapes, alongside the history of the American West. BayStone worked on it from the outside in: first the sculpted exterior panels, then the interior from a bare warehouse floor, then the exhibit halls.
We designed, prefabricated and sequenced the exterior EIFS panels. Inside, we designed the themed environments and managed their build with specialist makers, including about 45,000 square feet of built mountains. Scale models, a full 3D model and install simulations planned the work before any of it was built.
- BayStone's work
- Design, prefabrication and installation sequencing of the exterior EIFS panels. Design and management of the themed interior work and exhibits.
- Location
- Concord, CA
- Years
- 2020 to 2025
- Architect of record
- LCA Architects
- General contractor
- BayGroup Construction, Inc. for the interior work
Project gallery · 10 images
Core & Shell
Exterior and Front of House
The outside of the building and the rooms at its front. The walls are clad in prefabricated EIFS panels sculpted as red rock, a Himalayan mountain face and an African savanna, hung in a planned sequence after painted mock-ups were approved. The pilasters with carved capitals and the round entrance rotunda are ours too, and we drew the themed lobby, banquet hall, gift shop and private dining room.
10 builds · 25 photographs
Scroll through the builds ↓01
EIFS panels
BayStone designed and prefabricated the EIFS panels for all four sides of the building and sequenced their delivery from the north side. They include the sculpted red-rock and Himalayan panels on the north, the Africa panels on the south, and the panels that carry the exterior murals. BayStone built and painted mock-ups of the red-rock and Himalayan panels before production.
02
Architectural elements
BayStone made the cornice, the pilasters with carved capitals and the columns of the building, including the ring of columns, fascia and upper and lower bands on the round entrance rotunda. The pilasters were made in four sections on steel-stud frames.
03
Stone cairn
The stone cairn at the front of the site is drawn down to its footing, steel frame and rebar cage.
04
Fibonacci patio
The entrance patio has a steel railing with a flame motif, wall caps and tile with a metal inlay. We drew the railing and the wall caps.
05
Lobby
Our drawings cover the lobby's themed ceilings and walls, including a barrel ceiling, soffits, a Maasai-themed wall and a mezzanine rail.
06
Banquet hall
The banquet hall has coffered ceilings and bamboo, rammed-earth and thatch finishes designed by BayStone.
07
Gift shop
In the gift shop, we drew the columns, plinths, sconces and backing layout.
08
Private dining
The private dining room has rammed-earth wall panels and niche lintels drawn by BayStone. The niches follow a numbered plan.
09
Entry barn-door valance
Above the barn-door track at the main museum entry runs a valance carved as a savanna scene. We drew its full package.
10
Art doors
BayStone designed art-finished doors and cut them on its CNC router. They include the carved animal doors, the restroom stall doors with art inserts and the theater's sliding door with a dinosaur mural face.
Museum
Interior Museum Build Out
The museum halls inside the building, built from a bare floor starting in October 2022. The mountains went up first, then the exhibit platforms, then the animals, region by region across the seven continents, the oceans and fresh water. Around them stand an Old West street, landmark replicas and the casework of the exhibit halls. We designed and managed the work and built parts of it with specialist makers.
27 builds · 91 photographs
Scroll through the builds ↓01
Theater
BayStone detailed the light cove and the screen wall of the museum theater. Its motorized sliding door carries a dinosaur mural art panel.
02
Curbs and railings
The exhibit platforms have curbs cast and finished by BayStone and railings fabricated from BayStone's production files. The first railing was laid out overnight with lasers and reference points.
03
Benches
Benches along the visitor path were drawn in a 19-sheet package.
04
Rockform
The exhibits sit among themed rock landforms. BayStone built rock-face mock-ups in autumn 2022 to prove the look before the full build.
05
Fresh water
The fresh water exhibit is its own room, below the waterfall at the head of the overhead river.
06
Overhead river
A waterfall drops into an overhead river that connects the fresh water and saltwater rooms. The river is a steel channel with clear infill, LED rope lighting and a sculpted bank, and it runs on into the saltwater room.
07
Saltwater
The saltwater room has a coral reef and shipwreck design with a hung shark and a themed ceiling.
08
Great white shark
A life-size great white shark hangs high in the saltwater room on a tube-steel frame. We drew its supports and fitment.
09
Anaconda
A 30-foot anaconda coils in a tree. The concept and the tree model are ours.
10
Boat
A boat stands on sand behind a rail beside a clear water panel, in a diorama with faux water.
11
Dino Dig
The Dino Dig is a dig-site display with cast dinosaur bones and a cast wall covering. BayStone made 3D models and moulds for the repeating bones.
12
Meteor
The Chicxulub meteor is a large sculpted rock of foam and mesh blocks, lit by projectors with a burning-embers effect.
13
Woolly rhino and Irish elk
A 12-foot woolly rhino and an Irish elk with a 13-foot antler span stand in the prehistory area. We drew the cut sheets for both. The rhino, Esmeralda, was given a grumpy expression on purpose, as the last of her kind, and she has become one of the visitors' favorite pieces.
14
Mud hut
A round African mud hut stands among the Africa animals, with a radial log roof frame, mud-finished walls and a thatched roof. BayStone built the frame in its shop and on site.
15
African column and bench
A round African-style column with a bench around the base stands in the Africa viewing area.
16
Archway passage
An archway links the prehistory side and the Africa side, with keystone, capital and pilaster pieces.
17
Storeroom door
A 10 ft by 10 ft elephant-themed barn door closes the storeroom behind the Africa scene. BayStone designed, drafted and produced the door as a layered panel of border, artwork and backing.
18
Old West town
A street of three Old West facades includes a saloon, a trading post and a hotel, with signs and a boardwalk.
19
Resettled timeline
A timeline wall traces the settlement of the West, from east to west.
20
Trapper's cabin
A log cabin from about 1870 has front and side stairs and an accessible ramp.
21
Miners cabin and lift
The Old West area includes a mining cabin and a shaft lift.
22
Train and cave
A 9/10-scale reproduction of an 1883 wood-fired locomotive stands on a trestle that runs through a rock cave.
23
Totem pole
A carved totem pole of stacked animal figures has a bench at its base.
24
Temple of Dendur
A replica of the Temple of Dendur serves as the opening of a traveling exhibit.
25
Brownstones
Three New York brownstone facades from about 1830 stand in the museum, with a mural backdrop that leads into the Old West. They were worked out in weeks of small pencil sketches, and BayStone made the stone-look foam pieces in its shop.
26
Trees
Artificial trees are fixed to the building structure, many as wraps around structural columns. We laid them out and drew the attachments.
27
Casework design
BayStone designed and detailed the display casework for the exhibit halls, with shop drawings for each case type. The casework is alder with trim and corbel details.
San Francisco East Bay Museum · 131 photographs


